A22E/A22NE-P/A22NE-PD
Pulsador de parada de emergencia
La gama A22E/A22NE-P/A22NE-PD ofrece pulsadores de parada de emergencia con varios tipos de cabezales. Además, para una aplicación flexible, hay disponible una amplia gama de accesorios y, para realizar una instalación y un mantenimiento sencillos, ofrecemos varias combinaciones de contactos.
- Mecanismo de apertura directa para abrir el circuito si el contacto se funde
- Con mecanismo de bloqueo para evitar errores de manipulación
- Palanca de bloqueo para montar y desmontar la unidad fácilmente
- Utiliza anillo de 25 mm de diámetro para la instalación en panel en secciones de 25 mm de diámetro*
- En un modelo equipado con función de contacto con la palanca de bloqueo, se puede detectar la instalación inadecuada de la unidad de interruptores. (A22NE-PD)
*Los interruptores con un grado de protección IP69K no son compatibles con los paneles en secciones de 25 mm de diámetro.
Especificaciones y modelos disponibles
| Producto | Number of contacts, normally-open | Number of contacts, normally-closed | Unlocking method | Diameter cap | Hole diameter | Mounting method | With lighting | With lock lever contact function | Button text | Text color | Lighting voltage | Connection type auxiliary circuit | Descripción | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
0 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Screw connection | Pulsador de parada de emergencia, terminal de tornillos, sin iluminación, 40 mm de diámetro, bloqueo al pulsar/desbloqueo al girar, 1NC |
|
|
|
0 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Screw connection | Pulsador de parada de emergencia, terminal de tornillos, sin iluminación, 40 mm de diámetro, bloqueo al pulsar/desbloqueo al girar, 2NC |
|
|
|
0 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Surface mounting | No | No | None | N/A | N/A | Screw connection | Interruptor de parada de emergencia, 24 Vca / Vcc , 40 mm de diámetro, bloqueo al pulsar / desbloqueo al girar, DPST-NC, dentro de una caja de control |
|
|
|
1 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Screw connection | Pulsador de parada de emergencia, terminal de tornillos, sin iluminación, 40 mm de diámetro, bloqueo al pulsar/desbloqueo al girar, 1NC + 1NA |
|
|
|
1 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Surface mounting | No | No | None | N/A | N/A | Screw connection | Interruptor de parada de emergencia, 24 V ca/cc, 40 mm de diámetro, bloqueo al pulsar/desbloqueo al girar, SPST-NA + SPST-NC, dentro de una caja de control |
|
|
|
0 | 2 | Turn unlatching mechanism | 30 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Screw connection | Seta Pulsar-Girar D30mm 2NC |
|
|
|
0 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | Yes | No | None | N/A | 24 VAC/DC | Screw connection | Cabeza seta iluminación 24Vac/Vdc SPST-NC D40mm |
|
|
|
0 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | Yes | No | None | N/A | 24 VAC/DC | Screw connection | Pulsador de parada de emergencia, iluminado, 40 mm de diámetro, bloqueo al pulsar/desbloqueo al girar, IP65 |
|
|
|
0 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | Yes | No | None | N/A | 24 VAC/DC | Spring clamp connection | Pulsador 40mm Emergencia Iluminación 24Vcc/Vca Girar IP65 1 NC Push-in+ |
|
|
|
0 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 1 NC Push-in+ |
|
|
|
0 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Surface mounting | No | No | STOP | Black | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 1 NC Push-in+ incluye Caja amarilla |
|
|
|
1 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | Yes | No | None | N/A | 24 VAC/DC | Spring clamp connection | Pulsador 40mm Emergencia Iluminación 24Vcc/Vca Girar IP65 1 NC+1NA Push-in+ |
|
|
|
1 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 1 NC+1NA Push-in+ |
|
|
|
1 | 1 | Turn unlatching mechanism | 40 mm | 22 mm | Surface mounting | No | No | STOP | Black | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 1 NC+1NA Push-in+ incluye Caja amarilla |
|
|
|
0 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | Yes | No | None | N/A | 24 VAC/DC | Spring clamp connection | Pulsador 40mm Emergencia Iluminación 24Vcc/Vca Girar IP65 2NC Push-in+ |
|
|
|
0 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 2NC Push-in+ |
|
|
|
0 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Surface mounting | No | No | STOP | Black | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 2NC Push-in+ incluye Caja amarilla |
|
|
|
1 | 2 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 2NC+1NA Push-in+ |
|
|
|
0 | 3 | Turn unlatching mechanism | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Spring clamp connection | Pulsador 40mm Emergencia Girar IP65 3NC Push-in+ |
|
|
|
0 | 2 | Pull release | 40 mm | 22 mm | Build-in | No | No | None | N/A | N/A | Spring clamp connection | Pulsador 40mm Emergencia, bloqueo al pulsar/desbloqueo al girar, 2NC |
|
No se han encontrado resultados. Amplíe su selección de filtro.
Restablecer todos los filtros
Accesorios
Ordering information
Common to Screw Terminal Block types (A22E)/Push-in Plus Terminal Block types (A22NE-P/A22NE-PD) (Order Separately)
| Item | Appearance | Classification | Remarks | Order code | |
|---|---|---|---|---|---|
| Legend Plates for Emergency Stop |
 |
60-dia. black letters on yellow back-ground | Used in combination with the washer rubber when the level of protection is to be met between panels. |
A22Z-3466-1 | |
| 90-dia. black letters on yellow back-ground | A22Z-3476-1 | ||||
| 60-dia. black letters on yellow background | Cannot be used in combination with the Control Boxes. Used in combination with the washer rubber when the level of protection is to be met between panels. |
A22Z-3466-2 | |||
| Hole Plug |  |
Round | Used for covering the panel cutouts for future panel expansion. Black color. |
A22Z-3530 | |
| Connectors |  |
Applicable cable diameter | 7 to 9 dia. | Plastic connector used to extend a cable from the Switch Box. | A22Z-3500-1 |
| 9 to 11 dia. | A22Z-3500-2 | ||||
| 25-dia. Ring |  |
– | Use when mounting to a panel with a 25-dia. hole. Material: Rubber, Level of protection: IP65
2
Switches with an IP69K degree of protection
do not support the 25-dia. |
A22Z-R25 | |
| 30-dia. Resin Attachment |
 |
– | Use when mounting to a panel with a 30-dia. hole. A rubber washer (A22Z-R) is provided with the product. |
A22Z-A30 | |
| Lock Ring |  |
– | The body is equipped with a Lock Ring. This Lock Ring is used when a more secure lock feature is -required. |
A22Z-3360 | |
| Tightening Tool | – | Used for tightening the mounting ring from the back side of the panel, and for removing the cap in lighted models. |
A22Z-3905 | ||
| E-stop Shroud for EMO, Yellow |
 |
– | Provides SEMI-S2/SEMATECH APPLICATION GUIDE FOR SEMI-S2 compatibility. The SEMI-S2-compatible Shroud and legend plate for EMERGENCY OFF come as a set. Use with an A22E Emergency Stop Switch (for emergency shutoff)
2 ,These Shrouds are for use with the equipment only that conforms to SEMI standards. Do not use them for any other applications (e.g. emergency stop switches for machines or devices such as Machine tools, Printing presses, Industrial machinery, etc).
2
The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the A22Z-EG⬜ E-stop Shrouds. |
A22Z-EG1 | |
| E-stop Shroud for EMO, Yellow |
 |
Legend plate for EMERGENCY OFF is not -included. |
Provides SEMI-S2/SEMATECH APPLICATION GUIDE FOR SEMI S2 compatibility. Use with an A22E with EMO indication. (for -emergency off)
2
The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the A22Z-EG⬜ E-stop Shrouds. |
A22Z-EG10 | |
| E-stop Shroud for EMS, White |
 |
– | Provides SEMI-S2/SEMATECH APPLICATION GUIDE FOR SEMI-S2 compatibility. The SEMI-S2-compatible Shroud and legend plate for EMERGENCY STOP come as a set. Use with an A22E Emergency Stop Switch. (for emergency stop)
2 ,These Shrouds are for use with the equipment only that conforms to SEMI standards. Do not use them for any other applications (e.g. emergency stop switches for machines or devices such as Machine tools, Printing presses, Industrial machinery, etc).
2
The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the A22Z-EG⬜ E-stop Shrouds. |
A22Z-EG1-W | |
| E-stop Shroud for EMS, White |
 |
Legend plate for EMERGENCY STOP is not -included. |
Provides SEMI-S2/SEMATECH APPLICATION GUIDE FOR SEMI S2 compatibility. Use with an A22E with EMS indication. (for emergency stop)
2
The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the A22Z-EG⬜ E-stop Shrouds. |
A22Z-EG10-W | |
| E-stop Shroud, Yellow |  |
Spacer Unit is not included. | SEMI-S2/SEMATECH APPLICATION GUIDE FOR SEMI S2-compatible Shroud. (for emergency shutoff)
2 ,These Shrouds are for use with the equipment only that conforms to SEMI standards. Do not use them for any other applications (e.g. emergency stop switches for machines or devices such as Machine tools, Printing presses, Industrial machinery, etc).
2
The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the A22Z-EG⬜ E-stop Shrouds. Use together with an A22E Emergency Stop Switch. |
A22Z-EG2 | |
| One Spacer Unit is included. | A22Z-EG21 | ||||
| Two Spacer Units are included. | A22Z-EG22 | ||||
| E-stop Shroud for EMO, Yellow |
 |
– | Provides SEMI-S2/SEMATECH APPLICATION GUIDE FOR SEMI-S2 compatibility. The SEMI-S2-compatible Shroud and legend plate for EMERGENCY OFF come as a set. Use with an A22E Emergency Stop Switch. (for emergency shutoff)
2 ,These Shrouds are for use with the equipment only that conforms to SEMI standards. Do not use them for any other applications (e.g. emergency stop switches for machines or devices such as Machine tools, Printing presses, Industrial machinery, etc).
2
The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the A22Z-EG⬜ E-stop Shrouds. |
A22Z-EG3 | |
| Rubber Packing |  |
– | Used together with accessories. Contains 10 packings. |
A22Z-R | |
Note:
- Accessories for A22Z-EG1: one “EMERGENCY OFF” label, two rubber packings, and one lock ring
- Accessories for A22Z-EG10: one rubber packing and one lock ring (without label)
¿En qué podemos ayudarle?
Si tiene alguna duda o necesita información sobre un presupuesto, póngase en contacto con nosotros o envíe una solicitud.
+34 913 777 902
Póngase en contacto con nosotros
Contacten conmigo A22E/A22NE-P/A22NE-PD
Gracias por enviarnos su solicitud. Le responderemos lo antes posible.
Tenemos dificultades técnicas. Su formulario no ha sido enviado. Porfavor, acepte nuestras disculpas e inténtelo de nuevo más tarde.\ Detalle: [details]
Download+34 913 777 902
+34 913 777 902
Solicitar presupuesto
Solicitar presupuesto
Presupuesto para A22E/A22NE-P/A22NE-PD
A través de este formulario puede solicitar cotización del producto escogido. Por favor, cumplimente todos los campos marcados con *. Sus datos personales serán tratados con la máxima confidencialidad.
Gracias por la cotización solicitada. Le enviaremos la información solicitada lo antes posible.
Tenemos dificultades técnicas. Su formulario no ha sido enviado. Porfavor, acepte nuestras disculpas e inténtelo de nuevo más tarde.\ Detalle: [details]
DownloadSolicitar presupuesto
Solicitar presupuesto
Productos relacionados:
-
Pulsadores de 22 mm de diseño universal con diferenciación de colores en los contactos
-
Selectores de llave de 22mm de diámetro con opciones flexibles de bisel
-
Selectores de maneta de diseño universal con diferenciación de colores, facilidad de ensamblaje y seguridad
-
Indicadores luminosos IP66 de 22 mm que muestran el estado de la maquinaria y los procesos en cuadros de control.
Descargas
