Serie KM50

Características

Control del consumo energético en panel de gran visibilidad

La serie KM50 puede medir la alimentación, corriente y tensión eléctrica producida y consumida, además de la potencia reactiva de avance, potencia reactiva de retardo, el factor de potencia y la frecuencia, entre otras magnitudes.

  • Ayuda a elaborar análisis de ahorro de energía gracias a su función de clasificación energética integrada.
  • Mediciones muy precisas incluso para corrientes inferiores al 5 % del valor nominal mediante conmutación automática del rango.
  • Puede medir y diferenciar la energía consumida y la energía generada.
  • Medición de la potencia reactiva y del factor de potencia.
  • Medición de impulsos y conversión directa para medir los elementos de rendimiento clave de gestión energética (número de unidades / kWh).
  • No requiere transformador de tensión, detección de tensión directa / entradas de transformador de corriente
  • Pantalla en color
  • Comunicaciones Modbus
  • Registro de datos incorporado
Especificaciones y modelos disponibles

Ordering information

KM50-E Smart power monitor

Applicable circuits

Power supply voltage (shared)

Dimensions

Communications

Protocol

Order code

Single-phase, two wire: 100 to 480 VAC

Single-phase, three wire: 100/200 VAC

Three-phase, three wire: 100 to 480 VAC

Three-phase, four wire: 85 to 277 VAC

100 to 240 VAC

96 × 48 × 93 (H × W × D)

RS-485

CompoWay/F: 31 nodes,
Modbus: 99 nodes
(Both are supported by the same model.)

KM50-E1-FLK

CTs

Rated primary current

Rated secondary current

Installation

Order code

5 A

Special output

Installed separately

KM20-CTF-5A

50 A

KM20-CTF-50A

100 A

KM20-CTF-100A

200 A

KM20-CTF-200A

400 A

KM20-CTF-400A

600 A

KM20-CTF-600A

Note: CT cables are not included with the CTs.

CT Cable

Cable length

Order code

3 m

KM20-CTF-CB3

Note: Either use the CT Cable specified by OMRON or use 1.25-B3A crimp terminals and AWG22 wire from J.S.T. Mfg. Co., Ltd.

Specifications

Ratings

Item

KM50-E

Applicable circuit

Single-phase two wire, single-phase three wire, three-phase three wire and three-phase four wire power

Rated power supply voltage

100 to 240 VAC, 50/60 Hz

Allowable supply voltage range

85% to 110% of rated power supply voltage

Allowable frequency range

45 to 65 Hz

Power consumption

7 VA max.

Rated input

Rated input voltage

100 to 480 VAC (single-phase, 2-wire): Line voltage

100/200 VAC (single-phase, 3-wire): Phase voltage/line voltage

100 to 480 VAC (3-phase, 3-wire): Line voltage

58 to 277 VAC (3-phase, 4-wire): Phase voltage

Rated input current

5 A, 50 A, 100 A, 200 A, 400 A, or 600 A (primary current of Special CT)1

Rated frequency

50/60 Hz

Rated input power

With 5-A CT: 4 kW

With 100-A CT: 80 kW

With 400-A CT: 320 kW

With 50-A CT: 40 kW

With 200-A CT: 160 kW

With 600-A CT: 480 kW

Allowable input voltage

110% of rated input voltage (continuous)

Allowable input current

120% of rated input current (continuous)

Ambient operating temperature

10 to 55°C (with no condensation or icing)

Storage temperature

25 to 65°C (with no condensation or icing)

Ambient and storage operation humidity

25% to 85%

Installation environment

Overvoltage category and measurement category: 2, Pollution level: 2

Performance

Smart power monitor

Item

KM50-E

Accuracy

Voltage

± 1.0% FS ± 1 digit (at ambient temperature of 23°C, rated input, and rated frequency).

However, the accuracy is ± 2.0% FS ± 1 digit for the Vtr line voltage for three-phase, three wire power and the Vrs line voltage for single-phase, three wire power under the same conditions.

Current

± 1.0% FS ± 1 digit (at ambient temperature of 23°C, rated input, and rated frequency).

However, the accuracy is ± 2.0% FS ± 1 digit for the phase-S current for three-phase, three wire power and the phase-N current for single-phase, three wire power under the same conditions.

Active power
Reactive power

± 2.0% FS ± 1 digit (at ambient temperature of 23°C, rated input, rated frequency, and a power factor of 1)

Reactive power formula: Reactive power = v × i × sin θ

“v” is the instantaneous voltage and “i” is the instantaneous current.
θ is the phase difference between the voltage and current.

Frequency

± 0.3 Hz ± 1 digit (at ambient temperature of 23°C, rated input, and rated frequency)

Power factor

± 5.0% FS ± 1 digit (at ambient temperature of 23°C, rated input, rated frequency, and power factor = 0.5 to 1 to 0.5)

Power factor formula: Power factor = Active power/Apparent power

 

Temperature

± 5°C two hours after the power is turned ON (after setting the offset to match the ambient environment)

Communications

Communications method

RS-485 (two wire half-duplex)

Sync method

Start-stop

Unit number setting

CompoWay/F: 0 to 99, Modbus: 1 to 99

Baud rate

1.2, 2.4, 4.8, 9.6, 19.2, 38.4 kbps

Transmission code

CompoWay/F: ASCII, Modbus: Binary

Data length

7, 8 bits

Stop bit length

1, 2 bits

Vertical parity

Even, odd, or none

Maximum transmission distance

500 m

Maximum number of connected Power Monitors

CompoWay/F: 31, Modbus: 99

 

CTs

Item

KM20-CTF-5A

KM20-CTF-50A

KM20-CTF-100A

KM20-CTF-200A

KM20-CTF-400A

KM20-CTF-600A

Rated primary current

5 A

50 A

100 A

200 A

400 A

600 A

Secondary winding

3,000 turns

6,000 turns

9,000 turns

Application frequency

10 Hz to 5 kHz

Insulation resistance

Between output terminal and external case: 50 M Ω min. (at 500 VDC)

Dielectric strength

Between output terminal and external case: 2,000 VAC for 1 min

Protective element

7.5 V clamp element

Allowable number of connections/disconnections

100 times

Inner diameter

10 dia.

16 dia.

24 dia.

37 dia.

Operating temperature and humidity range

20 to 60°C 85% (with no condensation)

Storage temperature and humidity range

30 to 65°C 85% (with no condensation)


1. A special output signal is output as the secondary current from the Special CT.

1. A special output signal is output as the secondary current from the Special CT.

¿Tiene preguntas?

Estamos encantados de ayudarle.

Póngase en contacto con nosotros

Suscripción a novedades

Boletines sobre avances tecnológicos, soluciones y servicios, directamente en su bandeja de entrada.

Gracias por suscribirse a las eNews de Omron. En breve, recibirá un e-mail nuestro. Este e-mail contiene un link para activar su suscripción al servicio de newsletter de Omron. Usamos este méto para asegurarnos de que nadie puede manipular su e-mail y para cumplir con las condiciones legales de protección de datos.

Tenemos dificultades técnicas. Su formulario no ha sido enviado. Porfavor, acepte nuestras disculpas e inténtelo de nuevo más tarde.\ Detalle: [details]

Download

Documentación de productos

Descarga datasheets, manuales y catálogos.

Explore el centro de descargas

Cursos de formación

Fórmese con nuestros mejores ingenieros. Para principiantes o usuarios avanzados.

Ver cursos de formación