2-channel models

Standard Type

Pre-wired (2 m)

2 outputs

E3NX-MA11

E3NX-MA41

Wire-saving Connector

2 outputs

E3NX-MA6

E3NX-MA8

Model for Sensor Communications Unit1

Connector for Sensor Communications Unit

−

E3NX-MA0

Inputs/outputs

Outputs

2 outputs

−2

External inputs

−

−

Light source (wavelength)

Red, 4-element LED (625 nm)

Response time

Super-high-speed mode (SHS)

Operate or reset: 100 μs

High-speed mode (HS)

Operate or reset: 450 μs

Standard mode (Stnd)

Operate or reset: 1 ms

Giga-power mode (GIGA)

Operate or reset: 16 ms

Sensitivity adjustment

Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, or percentage tuning (-99% to 99%)) or manual adjustment

Maximum connectable Units

30

With E3NW-ECT: 30 units3

With E3NW-CCL: 16 units

No. of Units for mutual interference prevention4 5

9

Functions

Automatic power control (APC)

Always enabled.

Dynamic power control (DPC)

Provided

Timer

Select from timer disabled, OFF-delay, ON-delay, one-shot, or ON-delay + OFF-delay timer: 1 to 9,999 ms

Zero reset

Negative values can be displayed. (Threshold value is shifted.)

Resetting settings 6

Select from initial reset (factory defaults) or user reset (saved settings).

Eco mode

Select from OFF (digital display lit), Eco ON (digital display not lit), and Eco LO (digital display dimmed).

Bank switching

Select from banks 1 to 4.

Power tuning

Select from ON or OFF.

Output 1

Select from normal detection mode or area detection mode.

Output 2

Select from normal detection mode, AND output mode, OR output mode, XOR output mode,
GAP output mode, Falling synchronization mode, Rising synchronization mode or area detection mode.

Hysteresis width

Select from standard setting or user setting. For a user setting, the hysteresis width can be set from 0 to 9,999.

Ambient illumination (Receiver side)

Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max.

Ambient temperature range7

Operating:

Groups of 1 or 2 Amplifier Units: −25 to 55°C,
Groups of 3 to 10 Amplifier Units: −25 to 50°C,
Groups of 11 to 16 Amplifier Units: −25 to 45°C,
Groups of 17 to 30 Amplifier Units: −25 to 40°C

Storage:
−30 to 70°C (with no icing or condensation)

Operating:

Groups of 1 or 2 Amplifier Units: 0 to 55°C,
Groups of 3 to 10 Amplifier Units: 0 to 50°C,
Groups of 11 to 16 Amplifier Units: 0 to 45°C,
Groups of 17 to 30 Amplifier Units: 0 to 40°C

Storage:
−30 to 70°C (with no icing or condensation)

Ambient humidity range

Operating and storage: 35 to 85% (with no condensation) within the surrounding air temperature range shown above

Insulation resistance

20 MΩ min. (at 500 VDC)

Vibration resistance (destruction)

10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance (destruction)

500 m/s² for 3 times each in X, Y, and Z directions

150 m/s² for 3 times each in X, Y, and Z directions

Degree of protection

IEC 60529 IP50 (with Protective Cover attached)

Weight
(packed state/Sensor only)

Approx. 115 g/

approx. 75 g

Approx. 60g/

approx. 20g

Approx. 65 g/

approx. 25 g

Materials

Case

Polycarbonate (PC)

Cover

Polycarbonate (PC)

Cable

PVC