NY5
- NY5 IPC Machine Controller Datasheet
- IPC Software tools and drivers
- CNC Operator Software
Thank you for downloading the NY5 IPC Machine Controller Datasheet
Download againDid you know that 4 out of 5 distributors buy this product in a bundle?
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable.
Read more
-
OMRON Sysmac Platform with CNC-
OMRON Sysmac Platform with CNC
Our Sysmac Platform now integrates the complete machine processes and CNC in one machine controller. It improves production efficiency, enables complex motion trajectories and reduces machine development environment.
03:17 -
Omron IPC Machine Controller NY -series (v1)
https://industrial.omron.eu/en/products/industrial-pc Industrial PC with Sysmac machine control inside
02:05 -
Engineering video: “How Omron makes multi-touch industry-proof”
https://industrial.omron.eu/en/products/nyb-nyp Is it possible to operate capacitive touchscreens with gloves or to detect abnormal touch behavior, like water? In this episode R&D engineer Tom Derks explains which choices they made during the development of the NY Industrial PC platform to make it industry proof.
01:41 -
Engineering video - How Omron keeps Industrial PC's cool
https://industrial.omron.eu/en/products/industrial-pc Omron engineers explain what choices they made during the development of the NY Industrial PC platform. In this episode R&D engineer Santiago Figueira talks about the challenge of making heat transfer more efficient. He describes how he worked with colleagues to create an entirely new concept, which was tested using simulations and prototypes until the ideal solution was developed.
01:42
-
-
Omron IPC Machine Controller NY -series (v1)
-
OMRON Sysmac Platform with CNC
Our Sysmac Platform now integrates the complete machine processes and CNC in one machine controller. It improves production efficiency, enables complex motion trajectories and reduces machine development environment.
03:17 -
Omron IPC Machine Controller NY -series (v1)
https://industrial.omron.eu/en/products/industrial-pc Industrial PC with Sysmac machine control inside
02:05 -
Engineering video: “How Omron makes multi-touch industry-proof”
https://industrial.omron.eu/en/products/nyb-nyp Is it possible to operate capacitive touchscreens with gloves or to detect abnormal touch behavior, like water? In this episode R&D engineer Tom Derks explains which choices they made during the development of the NY Industrial PC platform to make it industry proof.
01:41 -
Engineering video - How Omron keeps Industrial PC's cool
https://industrial.omron.eu/en/products/industrial-pc Omron engineers explain what choices they made during the development of the NY Industrial PC platform. In this episode R&D engineer Santiago Figueira talks about the challenge of making heat transfer more efficient. He describes how he worked with colleagues to create an entirely new concept, which was tested using simulations and prototypes until the ideal solution was developed.
01:42
-
-
Engineering video: “How Omron makes multi-touch industry-proof”
-
OMRON Sysmac Platform with CNC
Our Sysmac Platform now integrates the complete machine processes and CNC in one machine controller. It improves production efficiency, enables complex motion trajectories and reduces machine development environment.
03:17 -
Omron IPC Machine Controller NY -series (v1)
https://industrial.omron.eu/en/products/industrial-pc Industrial PC with Sysmac machine control inside
02:05 -
Engineering video: “How Omron makes multi-touch industry-proof”
https://industrial.omron.eu/en/products/nyb-nyp Is it possible to operate capacitive touchscreens with gloves or to detect abnormal touch behavior, like water? In this episode R&D engineer Tom Derks explains which choices they made during the development of the NY Industrial PC platform to make it industry proof.
01:41 -
Engineering video - How Omron keeps Industrial PC's cool
https://industrial.omron.eu/en/products/industrial-pc Omron engineers explain what choices they made during the development of the NY Industrial PC platform. In this episode R&D engineer Santiago Figueira talks about the challenge of making heat transfer more efficient. He describes how he worked with colleagues to create an entirely new concept, which was tested using simulations and prototypes until the ideal solution was developed.
01:42
-
-
Engineering video - How Omron keeps Industrial PC's cool
-
OMRON Sysmac Platform with CNC
Our Sysmac Platform now integrates the complete machine processes and CNC in one machine controller. It improves production efficiency, enables complex motion trajectories and reduces machine development environment.
03:17 -
Omron IPC Machine Controller NY -series (v1)
https://industrial.omron.eu/en/products/industrial-pc Industrial PC with Sysmac machine control inside
02:05 -
Engineering video: “How Omron makes multi-touch industry-proof”
https://industrial.omron.eu/en/products/nyb-nyp Is it possible to operate capacitive touchscreens with gloves or to detect abnormal touch behavior, like water? In this episode R&D engineer Tom Derks explains which choices they made during the development of the NY Industrial PC platform to make it industry proof.
01:41 -
Engineering video - How Omron keeps Industrial PC's cool
https://industrial.omron.eu/en/products/industrial-pc Omron engineers explain what choices they made during the development of the NY Industrial PC platform. In this episode R&D engineer Santiago Figueira talks about the challenge of making heat transfer more efficient. He describes how he worked with colleagues to create an entirely new concept, which was tested using simulations and prototypes until the ideal solution was developed.
01:42
-
Controlador de máquina IPC
Controlador híbrido que combina el control de la máquina Sysmac y la tecnología de IT
- Procesador de cuatro núcleos Intel Core i7
- Windows Embedded Standard 7 de 64 bits
- Sistema operativo abierto que permite ejecutar software y hardware personalizado
- Funciones: secuencia de lógica, motion y CNC
- Funcionalidad CNC disponible en PC industrial formato panel: ideal para corte XY, fresado, torneado y cualquier otra aplicación que siga un trazado prestablecido como en máquinas de dispensación, doblado, fresado y modelado
- Puerto Ethernet/IP integrado para sus sistemas de IT y para la comunicación de máquina a máquina
- Controlador de máquina Sysmac incluido
- Tiempo de ciclo del sistema de 500 µs
- Hasta 64 ejes sincronizados
- Puerto EtherCAT integrado para hasta 192 esclavos sincronizados
NY Monitor Link
- Hasta 100 m de conexión entre IPC y pantalla
- Cable Ethernet estándar
- Tiempo de respuesta de visualización óptimo
- Preparado para 4K
Algunos detalles...
- Pantalla industrial de 12,1" y 15,4"
- Multitáctil con la última tecnología capacitiva
- Detección de falsos toques
- Permiten trabajar con guantes
- Soporte de montaje sencillo integrado
Conexiones
- Opciones: RS-232C o extra DVI-D para dos monitores
- DVI, 3 puertos Ethernet Gigabit RJ45, 2 puertos USB2.0, 2 puertos USB3.0
- Posibilidades de dispositivos de almacenamiento: HDD o SSD (tipos MLC o SLC de larga duración) y opción de segunda unidad
- Conexión de E/S preparada para la conexión de UPS -Fuente de alimentación: 24 V CC no aislada
El corazón del controlador de máquinas IPC
PC industrial formato sólo CPU: instalación versátil
Ordering information
Industrial Box PC
| Appearance | Specifications | Functionalities | Number of axes | Storage device | Order code | |||
|---|---|---|---|---|---|---|---|---|
| Sequence | Motion | AI | CNC | |||||
 |
i7-4700EQ processor 8 GB DRAM (non-ECC) WES7 (64-bit) operating system PCIe slot RS-232C port |
64 | 128 GB × 2 SSD iMLC/pSLC | NY512-Z500-1XX214T1X | ||||
| 32 | NY512-Z400-1XX214T1X | |||||||
| 16 | NY512-Z300-1XX214T1X | |||||||
| 64 | 128 GB SSD iMLC | NY512-1500-1XX213K1X | ||||||
| 64 GB SSD SLC | NY512-1500-1XX21391X | |||||||
| 32 | 128 GB SSD iMLC | NY512-1400-1XX213K1X | ||||||
| 64 GB SSD SLC | NY512-1400-1XX21391X | |||||||
| 16 | 128 GB SSD iMLC | NY512-1300-1XX213K1X | ||||||
| 64 GB SSD SLC | NY512-1300-1XX21391X | |||||||
Industrial Panel PC (Industrial Box PC + Monitor integrated)
| Appearance | Specifications | Screen size | Functionalities | Number of axes | Storage device | Order code | |||
|---|---|---|---|---|---|---|---|---|---|
| Sequence | Motion | AI | CNC | ||||||
 |
i7-4700EQ processor 8 GB DRAM (non-ECC) WES7 (64-bit) operating system PCIe slot RS-232C port Widescreen with capacitive touchscreen |
15.4-inches | 64 | 128 GB × 2 SSD iMLC/pSLC | NY532-Z500-112214T10 | ||||
| 32 | NY532-Z400-112214T10 | ||||||||
| 16 | NY532-Z300-112214T10 | ||||||||
| 32 | 128 GB SSD iMLC | NY532-5400-112213K10
2 , The number of controlled axes of the MC
Control Function Module is included.
2
One
CNC Operator license (SYSMAC-RTNC0001L) is attached with the CPU
unit. |
|||||||
| 64 GB SSD SLC | NY532-5400-112213910
2 , The number of controlled axes of the MC
Control Function Module is included.
2
One
CNC Operator license (SYSMAC-RTNC0001L) is attached with the CPU
unit. |
||||||||
| 64 | 128 GB SSD iMLC | NY532-1500-112213K10 | |||||||
| 64 GB SSD SLC | NY532-1500-112213910 | ||||||||
| 32 | 128 GB SSD iMLC | NY532-1400-112213K10 | |||||||
| 64 GB SSD SLC | NY532-1400-112213910 | ||||||||
| 16 | 128 GB SSD iMLC | NY532-1300-112213K10 | |||||||
| 64 GB SSD SLC | NY532-1300-112213910 | ||||||||
| 12.1-inches | 32 | 128 GB SSD iMLC | NY532-5400-111213K10
2 , The number of controlled axes of the MC
Control Function Module is included.
2
One
CNC Operator license (SYSMAC-RTNC0001L) is attached with the CPU
unit. |
||||||
| 64 GB SSD SLC | NY532-5400-111213910
2 , The number of controlled axes of the MC
Control Function Module is included.
2
One
CNC Operator license (SYSMAC-RTNC0001L) is attached with the CPU
unit. |
||||||||
| 64 | 128 GB SSD iMLC | NY532-1500-111213K10 | |||||||
| 64 GB SSD SLC | NY532-1500-111213910 | ||||||||
| 32 | 128 GB SSD iMLC | NY532-1400-111213K10 | |||||||
| 64 GB SSD SLC | NY532-1400-111213910 | ||||||||
| 16 | 128 GB SSD iMLC | NY532-1300-111213K10 | |||||||
| 64 GB SSD SLC | NY532-1300-111213910 | ||||||||
Industrial monitor
| Appearance | Specifications | Interface | Order code |
|---|---|---|---|
 |
18.5-inches display with capacitive touchscreen | DVI-D | NYM19W-C1000 |
| 15.4-inches display with capacitive touchscreen | NYM15W-C1000 | ||
| 12.1-inches display with capacitive touchscreen | NYM12W-C1000 | ||
| 18.5-inches display with capacitive touchscreen | NY Monitor Link (Up to 100 m) | NYM19W-C1060
2
This display
requires an IPC model with the NY Monitor Link interface option. |
|
| 15.4-inches display with capacitive touchscreen | NYM15W-C1060
2
This display
requires an IPC model with the NY Monitor Link interface option. |
||
| 12.1-inches display with capacitive touchscreen | NYM12W-C1060
2
This display
requires an IPC model with the NY Monitor Link interface option. |
Accessories
| Type | Specifications | Order code |
|---|---|---|
| Mounting brackets
2
Only applicable
to Industrial Box PC. |
Book mount | NY000-AB00 |
| Wall mount | NY000-AB01 | |
| SD memory card | 2 GB | HMC-SD291 |
| 4 GB | HMC-SD491 | |
| USB memory | 2 GB | FZ-MEM2G |
| 8 GB | FZ-MEM8G | |
| Storage devices | HDD 320 GB | NY000-AH00 |
| SSD 32 GB (SLC) | NY000-AS00 | |
| SSD 64 GB (SLC) | NY000-AS01 | |
| SSD 128 GB (iMLC) | NY000-AS02 | |
| DVI cable | Length: 2 m | NY000-AC00 2M |
| Length: 5 m | NY000-AC00 5M | |
| USB A to USB B cable | Length: 2 m | FH-VUAB 2M |
| Length: 5 m | FH-VUAB 5M | |
| Power supply | Output voltage: 24 VDC | S8VK-G |
| UPS | Output voltage during backup operation: 24 VDC±5% | S8BA
2
Revision
number 04 or higher is required. |
| UPS communication cable | Signals for signal output (BL, TR, BU, WB), remote ON/OFF input, UPS stop signal input (BS) Length: 2 m |
S8BW-C02 |
Spare parts (included with the Industrial Box PC and Industrial Panel PC
| Type | Specifications | Order code |
|---|---|---|
| Battery | Service life: 5 years at 25ºC | CJ1W-BAT01 |
| Fan unit | Service life: 70,000 hours of continuous operation at 40ºC with 15 to 65% relative humidity | NY000-AF00 |
| Accessory kit | Power connector, I/O connector, drive bracket and 4 mounting screws for drive installation, PCIe card support and clip for PCIe card installation |
NY000-AK00 |
Recommended EtherCAT and EtherNet/IP communication cables
| Item | Manufacturer | Color | Cable length (m) |
Order code | ||
|---|---|---|---|---|---|---|
| EtherCAT cable | Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCAT communications |
Standard type Cable with connectors on both ends (M12 straight/M12 straight) 
|
OMRON | Black | 0.5 | XS5W-T421-BM2-SS |
| 1 | XS5W-T421-CM2-SS | |||||
| 2 | XS5W-T421-DM2-SS | |||||
| 3 | XS5W-T421-EM2-SS | |||||
| 5 | XS5W-T421-GM2-SS | |||||
| 10 | XS5W-T421-JM2-SS | |||||
| Rugged type Cable with connectors on both ends (M12 straight/RJ45) 
|
Black | 0.5 | XS5W-T421-BMCSS | |||
| 1 | XS5W-T421-CMC-SS | |||||
| 2 | XS5W-T421-DMC-SS | |||||
| 3 | XS5W-T421-EMC-SS | |||||
| 5 | XS5W-T421-GMC-SS | |||||
| 10 | XS5W-T421-JMC-SS | |||||
| Ethernet/EtherCAT patch cable |
Cat 6a, AWG27, 4-pair cable Cable sheath material: LSZH
2 ,The lineup features low smoke zero halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
2
This cable is available in yellow, green and blue colors. |
Standard type Cable with connectors on both ends (RJ45/RJ45) 
|
Yellow | 0.2 | XS6W-6LSZH8SS20CM-Y | |
| 0.3 | XS6W-6LSZH8SS30CM-Y | |||||
| 0.5 | XS6W-6LSZH8SS50CM-Y | |||||
| 1 | XS6W-6LSZH8SS100CM-Y | |||||
| 1.5 | XS6W-6LSZH8SS150CM-Y | |||||
| 2 | XS6W-6LSZH8SS200CM-Y | |||||
| 3 | XS6W-6LSZH8SS300CM-Y | |||||
| 5 | XS6W-6LSZH8SS500CM-Y | |||||
| 7.5 | XS6W-6LSZH8SS750CM-Y | |||||
| 10 | XS6W-6LSZH8SS1000CM-Y | |||||
| 15 | XS6W-6LSZH8SS1500CM-Y | |||||
| 20 | XS6W-6LSZH8SS2000CM-Y | |||||
| Green | 0.2 | XS6W-6LSZH8SS20CM-G | ||||
| 0.3 | XS6W-6LSZH8SS30CM-G | |||||
| 0.5 | XS6W-6LSZH8SS50CM-G | |||||
| 1 | XS6W-6LSZH8SS100CM-G | |||||
| 1.5 | XS6W-6LSZH8SS150CM-G | |||||
| 2 | XS6W-6LSZH8SS200CM-G | |||||
| 3 | XS6W-6LSZH8SS300CM-G | |||||
| 5 | XS6W-6LSZH8SS500CM-G | |||||
| 7.5 | XS6W-6LSZH8SS750CM-G | |||||
| 10 | XS6W-6LSZH8SS1000CM-G | |||||
| 15 | XS6W-6LSZH8SS1500CM-G | |||||
| 20 | XS6W-6LSZH8SS2000CM-G | |||||
| Cat 5e, AWG26, 4-pair cable Cable sheath material: PUR*1 |
Standard type Cable with connectors on both ends (RJ45/RJ45)
|
Green | 0.5 | XS6W-5PUR8SS50CM-G | ||
| 1 | XS6W-5PUR8SS100CM-G | |||||
| 1.5 | XS6W-5PUR8SS150CM-G | |||||
| 2 | XS6W-5PUR8SS200CM-G | |||||
| 3 | XS6W-5PUR8SS300CM-G | |||||
| 5 | XS6W-5PUR8SS500CM-G | |||||
| 7.5 | XS6W-5PUR8SS750CM-G | |||||
| 10 | XS6W-5PUR8SS1000CM-G | |||||
| 15 | XS6W-5PUR8SS1500CM-G | |||||
| 20 | XS6W-5PUR8SS2000CM-G | |||||
| Ethernet/EtherCAT patch cable |
Cat 5e, AWG22, 2-pair cable | Rugged type Cable with connectors on both ends (RJ45/RJ45) 
|
OMRON | Grey | 0.3 | XS5W-T421-AMD-K |
| 0.5 | XS5W-T421-BMD-K | |||||
| 1 | XS5W-T421-CMD-K | |||||
| 2 | XS5W-T421-DMD-K | |||||
| 3 | XS5W-T421-EMD-K | |||||
| 5 | XS5W-T421-GMD-K | |||||
| 10 | XS5W-T421-JMD-K | |||||
| 15 | XS5W-T421-KMD-K | |||||
| Rugged type Cable with connectors on both ends (M12 straight/RJ45) 
|
Grey | 0.3 | XS5W-T421-AMC-K | |||
| 0.5 | XS5W-T421-BMC-K | |||||
| 1 | XS5W-T421-CMC-K | |||||
| 2 | XS5W-T421-DMC-K | |||||
| 3 | XS5W-T421-EMC-K | |||||
| 5 | XS5W-T421-GMC-K | |||||
| 10 | XS5W-T421-JMC-K | |||||
| 15 | XS5W-T421-KMC-K | |||||
| Cat 5e, AWG22, 2-pair cable | Rugged type Cable with connectors on both ends (M12 L right angle/RJ45) 
|
OMRON | Grey | 0.3 | XS5W-T422-AMC-K | |
| 0.5 | XS5W-T422-BMC-K | |||||
| 1 | XS5W-T422-CMC-K | |||||
| 2 | XS5W-T422-DMC-K | |||||
| 3 | XS5W-T422-EMC-K | |||||
| 5 | XS5W-T422-GMC-K | |||||
| 10 | XS5W-T422-JMC-K | |||||
| 15 | XS5W-T422-KMC-K | |||||
| Ethernet -installation -cable |
Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR) | Weidmüller | Green | 100 | WM IE-5IC4x2xAWG24/1-PUR | |
| Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR) | Green | 100 | WM IE-5IC4x2xAWG26/7-PUR | |||
| Connectors | RJ45 metallic connector For AWG22 to AWG26 |
 |
– | – | WM IE-T0-RJ45-FH-BK | |
| RJ45 plastic connector For AWG22 to AWG24 |
 |
OMRON | – | – | XS6G-T421-1 | |
| RJ45 socket | DIN-rail mount socket to terminate installation cable in the -cabinet | Weidmüller | – | – | WM IE-T0-RJ45-FJ-B | |
Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.
Computer software
| Specifications | Order code | ||
|---|---|---|---|
| Sysmac Studio
2
For the NY5 |
SYSMAC-SE2___
2
Refer
to the Sysmac Studio datasheet (https://industrial.omron.eu/en/products/sysmac-studio)
for detailed information or contact your OMRON representative. |
||
| AI Controller Software | Software that provides an operation interface for AI programming | DVD | SYSMAC-AICSTE00D |
| 1 license | SYSMAC-AICSTE01L | ||
| CNC Operator Software | Software that provides a operation -interface for NC programming, debugging and maintenance of CNC machine |
Download link: http://www.ia.omron.com/product/tool/cnc-operator/ |
SYSMAC-RTNC0000 |
| DVD | SYSMAC-RTNC0000D | ||
| License for the CNC Operator software (hardware key, USB dongle). The CNC Operator needs license key |
1 license | SYSMAC-RTNC0001L | |
| CNC Operator Software Development Kit | Provides a environment for customization of CNC Operator |
DVD | SYSMAC-RTNC0101D |
Included support software (pre-installed on the Industrial Box PC and the Industrial Panel PC)
| Item | Description |
|---|---|
| Industrial PC Support Utility | The Industrial PC Support Utility is a software utility to assist in diagnosing and resolving problems of the Industrial PC. |
| Industrial PC Tray Utility | The Industrial PC Tray Utility is a software utility that provides information about the current state of the Industrial PC, its related devices and associated software. |
| Industrial PC System API | The Industrial PC System API allows programmers to create programs that can retrieve information or set an indicator status of the Industrial PC. The API makes use of the included IPC System Service to manage the hardware. |
| Industrial Monitor Utility | The Industrial Monitor Utility provides a user interface to control settings and display details of connected Industrial Monitors. |
| Industrial Monitor Brightness Utility | The Industrial Monitor Brightness Utility is a small software utility that allows you to control the brightness of the screen backlight and LEDs of all connected Industrial Monitors. |
| Industrial Monitor API | The Industrial Monitor API allows programmers to create applications that can control the hardware features and retrieve information from connected Industrial Monitors. |
Rendimiento
- Basado en los procesadores Intel de cuarta generación, del Intel® Celeron® al Intel® Core™ i7
- Hasta 8 GB de RAM DDR3L
- Gráficos Intel® HD
- Eficacia exclusiva del disipador térmico
- Directiva RoHS (2002/95/EC), directivas de la UE
La sencillez mejora la fiabilidad
La complejidad innecesaria causa problemas, por lo que la hemos eliminado por completo para mejorar la fiabilidad y maximizar el rendimiento.
- No hay cables internos
- Sin caloductos complejos
- Mecanismos uniformes desde el punto de vista estructural para permitir una futura expansión
- Costes de montaje, mantenimiento y mano de obra reducidos
- Arquitectura sólida. Carcasa de aluminio presofundido
- Refrigeración activa y flujo de aire aislado de la electrónica
Controlador de máquinas
- Control de máquinas Sysmac en el interior
- Tiempo de ciclo de sistema de 500 µs
- De 16 a 64 ejes para motion control
- Puerto Ethernet/IP para comunicación máquina a máquina y HMI
- Puerto EtherCAT para hasta 192 esclavos sincronizados
- Safety over EtherCAT - FSoE
Plataforma Integrada Sysmac
Sysmac Studio - Entorno de desarrollo integrado
- Una única herramienta para lógica, motion, seguridad, robótica, visión, HMI y conexión de bases de datos
- Estándar abierto IEC 61131-3
- Biblioteca Sysmac para optimizar tiempo de ingeniería y la disponibilidad de las máquinas
- Editor de archivos de código G
- Monitor de ejecución, pantalla de código G/M activa
- Terminal de comandos
- Jog, homing
- El software personalizable permite que los usuarios añadan funcionalidad (requiere la versión SDK del operador CNC)
Archivos de descripción del dispositivo
Mostrar todo archivos de descripción del dispositivo
Suscripción a novedades
Boletines sobre avances tecnológicos, soluciones y servicios, directamente en su bandeja de entrada.
Gracias por suscribirse a las eNews de Omron. En breve, recibirá un e-mail nuestro. Este e-mail contiene un link para activar su suscripción al servicio de newsletter de Omron. Usamos este méto para asegurarnos de que nadie puede manipular su e-mail y para cumplir con las condiciones legales de protección de datos.
Tenemos dificultades técnicas. Su formulario no ha sido enviado. Porfavor, acepte nuestras disculpas e inténtelo de nuevo más tarde.\ Detalle: [details]
DownloadDocumentación de productos
Descarga datasheets, manuales y catálogos.
Explore el centro de descargasCursos de formación
Fórmese con nuestros mejores ingenieros. Para principiantes o usuarios avanzados.
Ver cursos de formación